Cisco SCE 8000 User Manual

3
Cisco SCE8000 GBE Installation and Configuration Guide
Organization
The major sections of this guide are as follows:
Table 2 Organization
Chapter Title Description
Chapter 1 Cisco Service Control Overview This chapter provides a brief introduction
to Cisco Service Control.
Chapter 2 Introduction to the Cisco SCE 8000 10 GBE
Platform
This chapter provides a hardware
overview of the Cisco SCE 8000
platform.
Chapter 3 Cisco SCE 8000 Topology and
Topology-Related Parameters
This chapter describes the possible
deployment topologies of the Cisco SCE
8000 and explains how various aspects of
the topology determine the configuration
of the system.
Chapter 4 Installing the Cisco SCE 8000 Chassis This chapter explains how to install a
Cisco SCE 8000 platform in the rack and
properly ground it.
Chapter 5 Connecting the Management Interfaces This chapter explains how to connect the
Cisco SCE 8000 platform to a local
console and perform the initial system
configuration via the setup wizard that
runs automatically.
Chapter 6 Cabling the Line Ports and Completing the
Installation
This chapter provides instructions for
cabling the Gigabit Ethernet ports for
both one and two Cisco SCE 8000
topologies, and for configuring Gigabit
Ethernet (GBE) interface parameters. In
a topology utilizing two Cisco SCE
8000s (cascade), this includes the
cascade ports as well as the line ports.
Chapter 7 Basic Cisco SCE 8000 Platform Operations This chapter describes how to start up the
Cisco SCE 8000 platform, reboot, and
shutdown. It also describes how to
manage configurations.
Chapter 8 Troubleshooting This chapter provides basic system
startup troubleshooting information.
Chapter 9 Removal and Replacement Procedures This chapter explains the procedures for
removing and replacing the power
supplies, fan trays, and other modules.
Appendix A Using Optical Splitters with 10 GBE Links This appendix supplies important
information about supported and not
supported optical splitter configurations
in the 10 GBE environment.

Cisco SCE 8000 Specifications

General

Brand	Cisco
Model	SCE 8000
Category	Switch
Language	English