IP Configuration: VRRP
Configuring VRRP
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 354
19
STEP 4 To see further information about a virtual router, click Details.
The following fields are displayed for the selected virtual router:
• Interface—The Layer 2 interface (port, LAG or VLAN) on which the virtual router is
defined
• Virtual Router Identifier—The virtual router identification number.
• Virtual Router MAC Address—The virtual MAC address of the virtual router
• Virtual Router IP Address Table—IP addresses associated with this virtual router.
• Description—The virtual router name.
• Additional Status
- Version—The virtual router version.
- Status—Is VRRP enabled.
- IP Address Owner—The owner of the IP address of the virtual router.
- Skew Time—Time used in calculation of master down interval.
- Master Down Interval—Length of time that master unit has been down.
- Master/Backup Status—Is the virtual router the master or backup.
- Preempt Mode—Is Preempt mode enabled.
- Accept/Control Mode—Displays either Drop/Accept.
• Track Parameters
- Tracker Object—Displays number of the SLA track that verifies the connectivity.
- Decrement—If the track object state is down, the VRRP priority of the router is
decremented by this value.
- State—Displays whether route is Up or Down.
- Current Priority—Displays priority of the router.
• My Parameters (of virtual router selected)
- Priority—Priority of this virtual router’s device, based on its ability to function as a
master.
- Advertisement Interval—Time interval, as described in VRRP Advertisements.
- Source IP Address—IP address to be used in VRRP messages.
To Next Page
Loading...
