Security: Secure Sensitive Data Management
Configuring SSD
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 377
19
To configure global SSD properties:
STEP 1 Click Security > Secure Sensitive Data Management > Properties.
The following field appears:
• Current Local Passphrase Type—Displays whether the default passphrase or a user-
defined passphrase is currently being used.
STEP 2 Enter the following Persistent Settings fields:
• Configuration File Passphrase Control—Select an option as described in
Configuration File Passphrase Control.
• Configuration File Integrity Control—Select to enable this feature. See
Configuration File Integrity Control.
STEP 3 Select a Read Mode for the current session (see Elements of an SSD Rule).
STEP 4 Click Apply. The settings are saved to the Running Configuration file.
To change the local passphrase:
STEP 1 Click Change Local Passphrase, and enter a new Local Passphrase:
• Default—Use the devices default passphrase.
• User Defined (Plaintext)—Enter a new passphrase.
• Confirm Passphrase—Confirm the new passphrase.
STEP 2 Click Apply. The settings are saved to the Running Configuration file.
SSD Rules Configuration
Only users with SSD read permission of Plaintext-only or Both are allowed to set SSD rules.
To Next Page
Loading...
Need help?
General
