Cisco SF350-24P Administration Guide

Smart Network Application (SNA)
Services
526 Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
25
Power Management Policy (Device Level)
This service enables setting power policies for selected devices.
Current Configuration
For every selected device, the current power schedule parameters are displayed, as shown
below:
The following parameters are displayed:
• SNA Power Schedule (active/inactive)
• Power schedule details if active
• Whether time power is active each day, beginning on Monday and ending on Sunday
• Behavior of ports in off-schedule times. The options include:
- PoE power inactive
- Data inactive
- Both PoE power and data inactive
- Custom—Displayed if an SNA-created schedule is not applied uniformly to all
Access ports. Access ports are ports whose VLAN mode is Access.
- Configured ports—A list of all ports that are bound to the SNA-created schedule.

Cisco SF350-24P Specifications

General

Model	SF350-24P
Category	Switch
PoE Budget	195W
Layer	Layer 3
Power Supply	Internal
Uplink Ports	2 x combo Gigabit SFP + 2 x Gigabit
MAC Address Table Size	16K entries
Jumbo Frame Support	9216 bytes
Management	Web, CLI, SNMP
Features	QoS, VLAN, IPv6, ACLs
Dimensions	440 mm x 257 mm x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% non-condensing
Weight	3.48 kg