Name: Cisco SG350-28P
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Administration

Idle Session Timeout

80 Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4

Idle Session Timeout

The Idle Session Timeout configures the time intervals that the management sessions can

remain idle before they timeout and you must log in again to reestablish one of the following

sessions:

• HTTP Session Timeout

• HTTPS Session Timeout

• Console Session Timeout

• Telnet Session Timeout

• SSH Session Timeout

To set the idle session timeout for various types of sessions:

STEP 1 Click Administration > Idle Session Timeout.

STEP 2 Select the timeout for the each type of session from the corresponding list. The default timeout

value is 10 minutes.

STEP 3 Click Apply to set the configuration settings on the device.

Time Settings

See Administration: Time Settings.

System Log

This section describes the system logging, which enables the device to generate multiple

independent logs. Each log is a set of messages describing system events.

The device generates the following local logs:

• Log sent to the console interface.

• Log written into a cyclical list of logged events in the RAM and erased when the

device reboots.

Other manuals for Cisco SG350-28P

Questions and Answers:

Need help?

Do you have a question about the Cisco SG350-28P and is the answer not in the manual?

General