Name: Cisco SG350-28P
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Smart Network Application (SNA)

Device Authorization Control (DAC)

510 Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4

Device Authorization Control (DAC)

Use the Device Authorization Control (DAC) feature to configure a list of authorized client

devices in the network. DAC activates 802.1x features on SNA devices in the network and an

embedded RADIUS server (RADIUS host server) can be configured on one of the SNA

devices. Device authorization is done via MAC authentication.

DAC Workflow

The DAC workflow consists of the following steps:

STEP 1 Activate DAC. See Accessing DAC.

STEP 2 Configure a RADIUS server device and client devices. See Specify a RADIUS Server

and Clients.

STEP 3 Add the client devices to the white list. See DAC List Management.

Accessing DAC

To access DAC, perform the following:

STEP 1 Click the options menu in the left-hand side of the masthead:

The following menu is displayed:

STEP 2 Select Edit DAC Mode.

Cisco SG350-28P Specifications

General

Cisco SG350-28P Administration Guide

Other manuals for Cisco SG350-28P