Administration
Software Upgrade
118 Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
6
STEP 2 Make sure the Upload Method TFTP radio button is selected.
STEP 3 Enter a name for the image file in the New Software Image field, including the path
to the directory that contains the image to upload.
For example, to upload the ap_upgrade.tar image located in the /share/
builds/ap directory, enter /share/builds/ap/ap_upgrade.tar in the New
Software Image field.
The software upgrade file supplied must be a
tar
file. Do not attempt to use
bin
files or files of other formats for the upgrade; these types of files will not work.
STEP 4 Enter the IP address of the TFTP server in the Server IP field.
STEP 5 Click Upgrade.
Upon clicking Upgrade, a popup confirmation window is displayed that
describes the upgrade process.
STEP 6 Click OK to confirm the upgrade and start the process.
NOTE The software upgrade process begins once you click Upgrade and then OK in the
popup confirmation window.
To Next Page
Loading...
