Administration
Event Logs
120 Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
6
STEP 5 To verify that the software upgrade completed successfully, check the software
version shown on the Software Upgrade tab. (It is also shown in the Summary
section). If the upgrade was successful, the updated version name or number is
indicated.
Event Logs
The Events page shows real-time system events on the access point such as
wireless clients associating with the access point and being authenticated.
You can view the most recent events generated by this access point and configure
logging settings. You can enable and configure persistent logging to write system
event logs to non-volatile memory so that the events are not erased when the
system reboots. And you can enable a remote log relay host to capture all system
events and errors in a Kernel Log.
To view system events, click the Events tab.
Figure 28 Event Logs
To Next Page
Loading...
