Cisco Small Business AP541N - VAP Configuration from the Web Interface

Configuration Examples
Configuring a VAP
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide 151
8
VAP Configuration from the Web Interface
STEP 1 Log onto the access point and navigate to the Wireless > Wireless Network Setup
(VAPs) page.
STEP 2 In the Enabled column for VAP 3, select the check box.
STEP 3 Enter 3 in the VLAN ID column.
STEP 4 In the SSID column, delete the existing SSID and type Marketing.
STEP 5 Select WPA Personal from the menu in the Security column.
The screen refreshes, and additional fields appear.
STEP 6 Select the WPA2 and CCMP (AES) options, and clear the WPA and TKIP options.
STEP 7 Enter a WPA encryption key in the Key field.
The key can be a mix of alphanumeric and special characters. The key is case
sensitive and can be between 8 and 63 characters.