Cisco Small Business AP541N - Appendix 9:Default Settings

9
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide 161
Default Settings
When you first power on an access point, it has the default settings shown in
Table 43.
Table 43 UAP Default Settings
Feature Default
System Information
User Name cisco
Password cisco
Ethernet Interface Settings
Connection Type DHCP
DHCP Enabled
IP Address 192.168.10.10 (if no DHCP server is
connected)
Subnet Mask 255.255.255.0
DNS Name None
Management VLAN ID 1
Untagged VLAN ID 1
Radio Settings
Radio Off
Radio 1 IEEE 802.11 Mode 802.11b/g/n
802.11b/g/n Channel Auto
Wireless Radio 1 Channel
Bandwidth
20 MHz
802.11a/n Channel Auto