Status
Traffic Statistics
24 Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
2
Wired Settings
The Wired Settings include the MAC address, management VLAN ID, IP address,
subnet mask, and DNS information. To change any of these settings, click Edit to be
redirected to the Setup > LAN Settings page.
For information about configuring these settings, see LAN Settings, page 35.
Wireless Settings
The Wireless Settings section indicates the status of the wireless radio, and
includes the Radio Mode and Channel. The Wireless Settings section also shows
the MAC address (read-only) associated with each wireless radio interface.
To change the Radio Mode or Channel settings, click Edit. You are redirected to the
Wireless > Radio Settings page.
For information about configuring these settings, see Modifying Wireless Radio
Settings, page 47 and Modifying Advanced Settings, page 74.
Traffic Statistics
The Traffic Statistics page provides basic information about the access point, a
real-time display of the transmit and receive statistics for the Ethernet interface,
and VAP (Virtual Access Point) statistics. The transmit and receive statistics are
totals since the access point was last started. If you reboot the access point, these
figures indicate transmit and receive totals since the reboot.
To view transmit and receive statistics for the access point, click the Traffic
Statistics tab. Click Refresh to refresh the page.
To Next Page
Loading...
