Cisco Small Business AP541N - Configuring Wireless Radio Settings; Wireless Radio Configuration from the Web Interface

Configuration Examples
Configuring Wireless Radio Settings
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide 153
8
STEP 13 Set the value of instance 3 in the apBssWpaAllowed object to false (2).
STEP 14 Set the value of instance 3 in the apBssWpaCipherTkip object to false (2).
STEP 15 Set the value of instance 3 in the apBssWpaCipherCcmp object to true (1).
Configuring Wireless Radio Settings
This example shows how to configure wireless Radio 1 with the following settings:
• Mode: IEEE 802.11b/g/n
• Channel: 6
• Channel Bandwidth: 40 MHz
• Maximum Stations: 100
• Transmit Power : 75%
Wireless Radio Configuration from the Web Interface
STEP 1 Log onto the access point and navigate to the Wireless > Advanced Settings page.
STEP 2 Make sure the number 1 appears in the wireless Radio field and that the status is
On.
STEP 3 From the Mode menu, select 802.11b/g/n.
STEP 4 From the Channel field, select 6.
STEP 5 From the Channel Bandwidth field, select 40 MHz.
STEP 6 In the Maximum Stations field, change the value to 100.
STEP 7 In the Transmit Power field, change the value to High.
The next window shows the Advanced Settings page with the settings specified
in this example.