Default Settings
162 Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
9
Primary Channel Lower
Protection Auto
MAX Wireless Clients 200
Transmit Power 100 percent
Rate Sets Supported (Mbps) IEEE 802.11a: 54, 48, 36, 24, 18, 12, 9, 6
IEEE 802.11b: 11, 5.5, 2, 1
IEEE 802.11g: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2,
1
IEEE 5-GHz 802.11n: 54, 48, 36, 24, 18, 12, 9, 6
IEEE 2.4 GHz 802.11g: 54, 48, 36, 24, 18, 12, 11, 9,
6, 5.5, 2, 1
Rate Sets (Mbps)
(Basic/Advertised)
IEEE 802.11a: 24, 12, 6
IEEE 802.11b: 2, 1
IEEE 802.11g: 11, 5.5, 2, 1
EEE 5-GHz 802.11n: 24, 12, 6
IEEE 2.4 GHz 802.11n: 11, 5.5, 2, 1
SSIDs cisco-data, cisco-voice, cisco-scan
Broadcast/Multicast Rate
Limiting
Enabled
Fixed Multicast Rate Auto
Beacon Interval 100
DTIM Period 2
Fragmentation Threshold 2346
RTS Threshold 2347
Virtual Access Point Settings
Status VAP0 is enabled on both radios, all other VAPs
disabled
Table 43 UAP Default Settings (Continued)
Feature Default