Default Settings
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide 163
9
VLAN ID 1
Network Name (SSID) Cisco VAP for VAP0
SSID for all other VAPs is Virtual Access Point
x
where
x
is the VAP number.
Broadcast SSID Allow
Security (mode) VAP2 is WPA Personal
All others are None (plain text)
Authentication Type None
RADIUS IP Address 0.0.0.0
RADIUS Key secret
RADIUS Accounting Disabled
HTTP Redirect None
Other Default Settings
WDS Settings None
STP Disabled
MAC Authentication No stations in list
Load Balancing Disabled
SNMP Enabled
RO SNMP Community Name Public
Managed AP Mode Disabled
Authentication (802.1X
Supplicant)
Disabled
Management ACL Disabled
HTTP Access Enabled
HTTPS Access Enabled
SNMP Agent Port 161
SNMP Set Requests Disabled
Console Port Access Enabled
Table 43 UAP Default Settings (Continued)
Feature Default
To Next Page
Loading...
