Administration
Event Logs
122 Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
6
NOTE To apply your changes, click Apply. Changing some settings might cause the
access point to stop and restart system processes. If this happens, wireless clients
will temporarily lose connectivity. We recommend that you change access point
settings when WLAN traffic is low.
Table 31 Logging Options
Field Description
Persistence
Choose Enabled to save system logs to non-volatile
memory so that the logs are not erased when the access
point reboots. Choose Disabled to save system logs to
volatile memory. Logs in volatile memory are deleted
when the system reboots.
Severity
Specify the severity level of the log messages to write to
non-volatile memory. For example, if you specify 2,
critical, alert, and emergency logs are written to non-
volatile memory. Error messages with a severity level of
3–7 are written to volatile memory.
0—emergency
1—alert
2—critical
3—error
4—warning
5—notice
6—info
7—debug
Depth
You can store up to 128 messages in non-volatile
memory. Once the number you configure in this field is
reached, the oldest log event is overwritten by the new
log event.
To Next Page
Loading...
