Getting Started
Connecting the Access Point to a PC
8 Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
1
Figure 4 Getting Started Page
STEP 3 Update the Cisco AP541N software with the latest version by clicking the Software
Upgrade link,
as shown in Figure 4.
Next, we recommend that you:
• Change the password by clicking Change Administrator Password.
• Configure the SSID and enable wireless security, by clicking Configure
Wireless Networks (SSIDs).
• Enable the wireless radio, by clicking Enable Wireless Radio.
• Assign a new static IP address to the access point if your network devices
are configured with static IP addresses, by clicking Set LAN IP Address.
To Next Page
Loading...
