Clustering Multiple Access Points
Managing Cluster Sessions
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide 135
7
To view a particular statistic for client sessions, select an item from the Display
dropdown list and click Go. You can view information about idle time, data rate,
signal strength and so forth; all of which are described in detail in Table 37.
A session in this context is the period of time in which a user on a client device
(station) with a unique MAC address maintains a connection with the wireless
network. The session begins when the client logs on to the network, and the
session ends when the client either logs off intentionally or loses the connection
for some other reason.
NOTE A session is not the same as an association, which describes a client connection to
a particular access point. A client network connection can shift from one clustered
access point to another within the context of the same session. A client station can
roam between access points and maintain the session.
To manage sessions associated with the cluster, click the Sessions tab.
Figure 34 Session Management
Details about the session information shown is described in Table 37.
To Next Page
Loading...
