Wireless
Modifying Virtual Access Point Settings
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide 57
4
Station
Isolation
Select from the drop-down menu to configure Station
Isolation for this VAP:
• When Station Isolation is disabled, wireless clients
can communicate with one another normally by
sending traffic through the access point.
• When Station Isolation is enabled, the access point
blocks communication between wireless clients on
the same VAP. The access point still allows data traffic
between its wireless clients and wired devices on the
network, across a WDS link, and with other wireless
clients associated with a different VAP.
Redirect Mode
Enable the HTTP redirect feature to redirect wireless clients
to a custom Web page.
When redirect mode is enabled, the user is redirected to the
URL you specify after the wireless client associates with an
access point and the user opens a Web browser on the client
to access the Internet.
The custom Web page must be located on an external Web
server and might contain information such as the company
logo and network usage policy.
NOTE: The wireless client is redirected to the external Web
server only once, when it is first associated with the access
point.
Redirect URL
Specify the URL where the Web browser is to be redirected
after the wireless client associates with the access point and
sends HTTP traffic. Length is 1 to 120 alphanumeric and
special characters, in the form "^[A-Za-z]+://[A-Za-z0-9-
]+\.[A-Za-z0-9]+"). For example: http://cisco.com.
Delete
Click the red x Delete icon to remove the configuration for a
particular VAP. When a VAP is deleted, all of its configuration
is restored to its default configuration settings. The entry is
removed from the list of displayed VAPs.
NOTE: VAP0 corresponds to the physical wireless radio
interface and cannot be deleted. The Delete icon is not
displayed for this VAP.
Table 11 VAP Field Descriptions
Field Description
To Next Page
Loading...
