Cisco SPA303 User Manual

Using Advanced Phone Features
Logging in to Your Phone/Extension Mobility (Cisco SPA 303)
Cisco Small Business IP Phone SPA 30X User Guide (SPCP) 41
4
To log in to your phone:
STEP 1 If you have the Login softkey on your phone, press it. (You may need to press the
more softkey to scroll through the phone screens to locate this softkey.)
If you do not have the Login softkey on your phone:
a. Press the Setup button.
b. Scroll to CME Services and press the Select softkey.
c. Scroll to Extension Mobility and press the Select softkey.
STEP 2 Enter your username.
STEP 3 Press the Down Arrow key and enter your password.
STEP 4 Press the Submit softkey. The phone is loaded with your user profile (for example,
your configured speed dial buttons).
To log out of your phone:
STEP 1 If you have the Logout softkey on your phone, press it. (You may need to press the
more softkey to scroll through the phone screens to locate this softkey.)
If you do not have the Logout softkey on your phone:
a. Press the Setup button.
b. Scroll to CME Services and press the Select softkey.
c. Scroll to Extension Mobility and press the Select softkey.
STEP 2 Press the Logout softkey.
STEP 3 Press the Exit softkey.

Cisco SPA303 Specifications

General

Display	Monochrome LCD
Lines	3
Speakerphone	Yes
Headset Jack	Yes (2.5 mm)
Handset	Yes
Ethernet Ports	2 x 10/100 Mbps
Protocol	SIP
Power	Power over Ethernet (PoE) or AC adapter
Audio Codec Support	G.711, G.729
QoS	802.1p/q