Cisco SX10 Quick Set - SX10 Quick Set at a Glance

D15330.06 SX10 Administrator Guide CE9.1, JUNE 2017. www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
10
Cisco TelePresence SX10 Quick Set Administrator Guide
The Cisco TelePresence SX10 Quick Set is an all-in-one unit
designed to video-enable small collaboration spaces.
It is a high quality unit that combines camera and codec into
a compact device that is mounted over a standard flat-panel
display. It can be connected to power and LAN through a single
cable for both power and Ethernet (PoE).
The camera has a wide-angle field of view, and provides good
overview even in small spaces. High-definition video is enabled
with 1080p30 resolution.
Features and benefits
• Optimal definition up to 1080p30 with content sharing at
WXGAp5.
• Wide angle 83° horizontal field of view with 5x zoom (optical
and digital).
• Ready-to-use unit with Power over Ethernet (PoE).
• Integrated microphone, and optional external
Cisco TelePresence Table Microphone 20.
• Operation using TRC6 remote control (default), or 10 inch
Touch controller (optional).
• Energy efficient with low power consumption (EU Class B).
• Registers with Cisco Unified Communications Manager
(UCM), Cisco TelePresence Video Communication Server
(VCS), and Cisco Spark.
SX10 Quick Set mounted on top
of a standard flat-panel display
SX10 Quick Set is delivered with a
TRC6 remote control. You may order the
Cisco TelePresence Touch 10 controller
as an option
SX10 Quick Set at a glance
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices

Introduction