Cisco SX10 Quick Set - Roomanalytics Settings; Roomanalytics Peoplepresencedetector

D15330.06 SX10 Administrator Guide CE9.1, JUNE 2017. www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
102
Cisco TelePresence SX10 Quick Set Administrator Guide
RoomAnalytics settings
RoomAnalytics PeoplePresenceDetector
The video system has the capability to find whether or not people are present in the room,
and report the result in the RoomAnalytics PeoplePresence status. This feature is based on
ultrasound. It takes a minimum of 2 minutes to detect whether people are present or not in
the room, and it may take up to 2 minutes for the status to change after the room becomes
vacant.
Requires user role: ADMIN, INTEGRATOR, USER
Default value: Off
Value space: Off/On
Off: The video system's status does not show whether or not there are people present in
the room.
On: The video system's status shows whether or not there are people present in the
room.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices

System settings