Cisco TelePresence MX700 - About Disconnect Cause Types

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 180
Cisco TelePresence MX700 and MX800
API Reference Guide
About disconnect cause types
The following parameters are logged when a call is discon-
nected. The disconnect cause types are used in disconnect
events (xEvent).
CauseValue Proprietary. We recomend the use of CauseType and CauseCode.
CauseType Describes why the call was disconnected. The value space is { OtherLocal, LocalDisconnect,
UnknownRemoteSite, LocalBusy, LocalReject, InsufficientSecurity, OtherRemote, RemoteDisconnect,
RemoteBusy, RemoteRejected, RemoteNoAnswer, CallForwarded, NetworkRejected }
CauseString Describes the Cause Code.
CauseCode The disconnect Cause Codes are defined in SIP and Q.850.
CauseOrigin SIP, Q.850, internal.
Example:
xEvent DisconnectEvent
*e CallDisconnect CauseValue: 1
CauseType: “LocalDisconnect”
CauseString: “”
OrigCallDirection: “outgoing”
RemoteURI: “firstname.lastname@company.com”
CallId: 89
CauseCode: 0
CauseOrigin: SIP
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

Appendices