Cisco TelePresence MX700 User Manual

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 71
Cisco TelePresence MX700 and MX800
API Reference Guide
xConfiguration Provisioning ExternalManager Path
Define the Path to the external manager / provisioning system. This setting is required when
several management services reside on the same server, i.e. share the same External Manager
address.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration Provisioning ExternalManager Path: "Path"
where
Path : String (0, 255)
A valid path to the external manager or provisioning system.
xConfiguration Provisioning ExternalManager Domain
Define the SIP domain for the VCS provisioning server.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration Provisioning ExternalManager Domain: "Domain"
where
Domain : String (0, 64)
A valid domain name.
Proximity configuration
xConfiguration Proximity Mode
Determine whether the video system will emit ultrasound pairing messages or not.
When the video system emits ultrasound, Proximity clients can detect that they are close to the
video system. In order to use a client, at least one of the Proximity services must be enabled
(refer to the Proximity Services settings). In general, Cisco recommends enabling all the
Proximity services.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration Proximity Mode: Mode
where
Mode : Off/On
Off: The video system does not emit ultrasound, and Proximity services cannot be used.
On: The video system emits ultrasound, and Proximity clients can detect that they are
close to the video system. Enabled Proximity services can be used.
xConfiguration Proximity Services CallControl
Enable or disable basic call control features on Proximity clients. When this setting is enabled,
you are able to control a call using a Proximity client (for example dial, mute, adjust volume and
hang up). This service is supported by mobile devices (iOS and Android). Proximity Mode must
be On for this setting to take any effect.
Requires user role: ADMIN
Default value: Disabled
USAGE:
xConfiguration Proximity Services CallControl: CallControl
where
CallControl : Enabled/Disabled
Enabled: Call control from a Proximity client is enabled.
Disabled: Call control from a Proximity client is disabled.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

xConfiguration

Cisco TelePresence MX700 Specifications

General

Product Type	Video conferencing system
Frame Rate	Up to 60 fps
Display	Dual 55-inch LCD
Audio	Integrated speakers and microphones
Video Standards	H.264
Network	Ethernet
Connectivity	HDMI, USB
Control	Touch 10 control unit
Video Resolution	1080p at 60 fps
Zoom	12x optical zoom
Codec	H.264
Network Protocols	SIP
Power Consumption	300W
Weight	90 kg