Cisco TelePresence MX700 - Systemunit Configuration; Xconfiguration Systemunit Name; Time Configuration; Xconfiguration Time Timeformat

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 78
Cisco TelePresence MX700 and MX800
API Reference Guide
SystemUnit configuration
xConfiguration SystemUnit Name
Define the system name. The system name will be sent as the hostname in a DHCP request
and when the codec is acting as an SNMP Agent.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration SystemUnit Na me: "Name"
where
Name : String (0, 50)
Define the system name.
Time configuration
xConfiguration Time TimeFormat
Define the time format.
Requires user role: USER
Default value: 24H
USAGE:
xConfiguration Time TimeFormat: TimeFormat
where
TimeFormat : 24H/12H
24H: Set the time format to 24 hours.
12H: Set the time format to 12 hours (AM/PM).
xConfiguration Time DateFormat
Define the date format.
Requires user role: USER
Default value: DD_MM_YY
USAGE:
xConfiguration Time DateFormat: DateFormat
where
DateFormat : DD_MM_YY/MM_DD_YY/YY_MM_DD
DD_MM_YY: The date January 30th 2010 will be displayed: 30.01.10
MM_DD_YY: The date January 30th 2010 will be displayed: 01.30.10
YY_MM_DD: The date January 30th 2010 will be displayed: 10.01.30
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

xConfiguration