Cisco TelePresence MX700 - Xconfiguration Standby Bootaction; Xconfiguration Standby Standbyaction; Xconfiguration Standby Wakeupaction

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 77
Cisco TelePresence MX700 and MX800
API Reference Guide
xConfiguration Standby BootAction
Define the camera position after a restart of the codec.
Requires user role: ADMIN
Default value: DefaultCameraPosition
USAGE:
xConfiguration Standby BootAction: BootA ction
where
BootAction : None/RestoreCameraPosition/DefaultCameraPosition
None: No action.
RestoreCameraPosition: When the video system restarts, the camera returns to the
position that it had before the restart.
DefaultCameraPosition: When the video system restarts, the camera moves to the
factory default position.
xConfiguration Standby StandbyAction
Define the camera position when going into standby mode.
Requires user role: ADMIN
Default value: PrivacyPosition
USAGE:
xConfiguration Standby Stand byAction: Stand byAction
where
StandbyAction : None/PrivacyPosition
None: No action.
PrivacyPosition: When the video system enters standby, the camera turns to a sideways
position for privacy.
xConfiguration Standby WakeupAction
Define the camera position when leaving standby mode.
Requires user role: ADMIN
Default value: RestoreCameraPosition
USAGE:
xConfiguration Standby WakeupAction: WakeupAction
where
WakeupAction : None/RestoreCameraPosition/DefaultCameraPosition
None: No action.
RestoreCameraPosition: When the video system leaves standby, the camera returns to
the position that it had before entering standby.
DefaultCameraPosition: When the video system leaves standby, the camera moves to
the factory default position.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

xConfiguration