Cisco TelePresence MX700 - Audio Commands; Xcommand Audio Microphones Mute; Xcommand Audio Microphones Unmute; Xcommand Audio Soundsandalerts Ringtone List

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 93
Cisco TelePresence MX700 and MX800
API Reference Guide
Audio commands
xCommand Audio Microphones Mute
Mute all microphones.
Requires user role: USER
USAGE:
xCommand Audio Microphones Mute
xCommand Audio Microphones Unmute
Unmute microphones.
Requires user role: USER
USAGE:
xCommand Audio Microphones Unmute
xCommand Audio SoundsAndAlerts Ringtone List
Lists all available ringtones that can be configured using xConfiguration Audio SoundsAndAlerts
RingTone.
Requires user role: USER
USAGE:
xCommand Audio SoundsAndAlerts Ringtone List
xCommand Audio SoundsAndAlerts Ringtone Play
Play one of the available ringtones. To get a list of the available ringtones use the command
xCommand Audio SoundsAndAlerts Ringtone List.
Requires user role: USER
USAGE:
xCommand Audio SoundsAndAlerts Ringtone Play RingTone: "RingTone"
where
RingTone: String (1, 100)
The name of the ringtone.
xCommand Audio Volume Decrease
Decrease the volume on the endpoint.
Requires user role: USER
USAGE:
xCommand Audio Volume Decrease [Ste ps: Steps]
where
Steps: Inte ge r (1..10)
One step equals 0.5dB decrease in volume.
xCommand Audio Volume Increase
Increase the volume on the endpoint.
Requires user role: USER
USAGE:
xCommand Audio Volume Increase [Ste ps: Steps]
where
Steps: Inte ge r (1..10)
One step equals 0.5dB increase in volume.
xCommand Audio Volume Mute
Mute the volume on the endpoint.
Requires user role: USER
USAGE:
xCommand Audio Volume Mute
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

xCommand