Cisco UCS E Series User Manual

Hardware Information for the NIM E-Series NCE
Table 12: NIM E-Series NCE Hardware at a Glance
UCS-EN140N-M2NIM E-Series NCEFeature
NIMForm Factor
Intel Atom Processor C2358CPU
4-Cores with 1.7-GHz Clock SpeedCPU Cores and CPU Clock Speed
8 GBRAM
—RAID
mSATAStorage Type
mSATA Flash DriveHDD
32 to 200 GB FormattedStorage Capacity
2 Gigabit Ethernet InterfacesInternal Network Interface
1 USB Connector
1 RJ-45 Gigabit Ethernet Connector
1 Management Port
1 KVM Port (Supports VGA,1 USB, 1 Serial DB9)
External Interfaces
4321, 4331, 4351, 4431, 4451-XRouter Platforms
ISR 4321—2 NCEs
ISR 4331—2 NCEs
ISR 4351—3 NCEs
ISR 4431—3 NCEs
ISR 4451-X—3 NCEs
Maximum Number of NCEs per Router
Supported Cisco EtherSwitch EHWIC and Cisco EtherSwitch Service Modules
The following table shows the Cisco EtherSwitch Enhanced High-Speed WAN Interface Cards (EHWICs)
and Cisco EtherSwitch Service Modules that are supported on the E-Series Server.
Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine Hardware Installation Guide
11
Hardware Information for the NIM E-Series NCE

Cisco UCS E Series Specifications

General

Brand	Cisco
Model	UCS E Series
Category	Server
Language	English