Cisco UCS E Series - Safety and Maintenance; Supported Transceivers; Recommended Safety Practices

Table 13: Supported Cisco EtherSwitch EHWIC and Cisco EtherSwitch Service Modules
Cisco EtherSwitch Service ModuleCisco EtherSwitch EHWIC
• SM-ES2-16-P
• SM-ES3-16-P
• SM-ES3G-16-P
• SM-ES2-24
• SM-ES2-24-P
• SM-ES3-24-P
• SM-ES3G-24-P
• SM-D-ES2-48
• SM-D-ES3-48-P
• SM-D-ES3G-48-P
• SM-X-ES3-16-P
• SM-X-ES3-24-P
• SM-X-ES3D-48-P
• EHWIC-D-8ESG-P=
• EHWIC-D-8ESG-P
• EHWIC-D-8ESG=
• EHWIC-D-8ESG
• EHWIC-4ESG-P=
• EHWIC-4ESG-P
• EHWIC-4ESG=
• EHWIC-4ESG
Supported Transceivers
Table 14: SFP Transceivers Supported on the E100-PCIE10GEFCOE
DescriptionSFP
SFP+ 10GBASE-CU 1-meter cable, passiveSFP-H10GB-CU1M
SFP+ 10GBASE-CU 3-meter cable, passiveSFP-H10GB-CU3M
SFP+ 10GBASE-CU 5-meter cable, passiveSFP-H10GB-CU5M
SFP+ 10GBASE-CU 7-meter cable, activeSFP-H10GB-ACU7M
SFP+ 10GBASE-CU 10-meter cable, activeSFP-H10GB-ACU10M
SFP+ (Optical)JDSU (PLRXPL-SC-S43-22-N) SFP+
SFP+ 10GBase-SR (Optical)SFP-10G-SR
Recommended Safety Practices
This section describes recommended practices for safe and effective installation of the hardware, and includes
the following topics:
Safety Recommendations
To prevent hazardous conditions, follow these safety recommendations while working with this equipment:
• Keep tools away from walk areas where you or others could fall over them.
• Do not wear loose clothing around the router. Fasten your tie or scarf and roll up your sleeves to prevent
clothing from being caught in the chassis.
• Wear safety glasses when working under any conditions that might be hazardous to your eyes.
Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine Hardware Installation Guide
12
Supported Transceivers