Contents
xxx
Catalyst 3750 Switch Software Configuration Guide
78-16180-02
Changing the DVMRP Route Threshold 36-46
Configuring a DVMRP Summary Address 36-47
Disabling DVMRP Autosummarization 36-49
Adding a Metric Offset to the DVMRP Route 36-49
Monitoring and Maintaining IP Multicast Routing 36-50
Clearing Caches, Tables, and Databases 36-51
Displaying System and Network Statistics 36-51
Monitoring IP Multicast Routing 36-52
CHAPTER
37 Configuring MSDP 37-1
Understanding MSDP 37-1
MSDP Operation 37-2
MSDP Benefits 37-3
Configuring MSDP 37-4
Default MSDP Configuration 37-4
Configuring a Default MSDP Peer 37-4
Caching Source-Active State 37-6
Requesting Source Information from an MSDP Peer 37-8
Controlling Source Information that Your Switch Originates 37-9
Redistributing Sources 37-9
Filtering Source-Active Request Messages 37-11
Controlling Source Information that Your Switch Forwards 37-12
Using a Filter 37-12
Using TTL to Limit the Multicast Data Sent in SA Messages 37-14
Controlling Source Information that Your Switch Receives 37-14
Configuring an MSDP Mesh Group 37-16
Shutting Down an MSDP Peer 37-16
Including a Bordering PIM Dense-Mode Region in MSDP 37-17
Configuring an Originating Address other than the RP Address 37-18
Monitoring and Maintaining MSDP 37-19
CHAPTER
38 Configuring Fallback Bridging 38-1
Understanding Fallback Bridging 38-1
Fallback Bridging Overview 38-1
Fallback Bridging and Switch Stacks 38-3
Configuring Fallback Bridging 38-3
Default Fallback Bridging Configuration 38-4
Fallback Bridging Configuration Guidelines 38-4
Creating a Bridge Group 38-4
To Next Page
Loading...
