Citizen CL-E730 User Manual

35
Chapter 2 Printer Operation
Mode Settings
Turning the power o while the printer is performing the “Save
Settings” function could cause a mis-save. Do not do this! If the power
is accidentally turned o, rst reset the printer to factory defaults.
Menu Setup Mode
If the MENU key is pressed while the printer is in the Ready state, the
printer enters menu setup mode. In this mode, the printer’s conguration
can be changed using the operation panel. During menu setting mode,
the LCD indicates the current menu settings and the key function.
4 3
2
1

Functions of the keys
When you enter Menu Setup Mode, the LCD displays “Main Menu” on the
top line and Page Setup below.
In the menu setup mode, the four keys become “cursor keys” to navigate
the menu.
1
MENU key (Shift/Change):
The MENU key goes up the menu system or selects a higher value
2
Feed key (Shift/Change):
The Feed key (
n
) goes down the menu system or selects a lower
value
3
Stop key (Enter/Save):
The Stop key (
g
) selects or saves the item or enters a menu
4
Pause key (Exit):
The Pause key (
e
) exits the current item (goes back) and eventually
exits the menu system
The menu settings are stored temporarily in the printer’s memory. They
are only permanently stored in the printer setup when you exit the menu
system and say “Yes” to the “Save Settings” question.
Caution

Citizen CL-E730 Specifications

General

Color	No
Print technology	Direct thermal / Thermal transfer
Maximum resolution	300 x 300 DPI
Maximum print height	- mm
Maximum printing width	104 mm
Core diameter	75 mm
Media thickness	0.0635 - 0.254 mm
Maximum media length	4013 mm
Maximum roll diameter	200 mm
Supported paper width	12.5 - 118 mm
Ethernet LAN	Yes
Optional connectivity	Parallel, Serial (RS-232), Wireless LAN
USB 2.0 ports quantity	1
Connectivity technology	Wired
Display	LCD
Product color	Black
LED indicators	Status
Flash memory	16 MB
Internal memory	32 MB
Server operating systems supported	Windows Server 2008 R2, Windows Server 2012
Windows operating systems supported	Windows 10, Windows 7, Windows 8, Windows 8.1
AC input voltage	100 - 230 V
Power consumption (standby)	2.9 W
Power consumption (printing)	72 W
Sustainability certificates	ENERGY STAR
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	458 mm
Width	250 mm
Height	261 mm
Weight	11000 g