3-4. Maintenance Tools List
3-4. Maintenance Tools List
CLP-621 & CLP-631 3-6
Maintenance tools shown below are needed when replacing the maintenance parts such as the
Main PCB Unit, Motor SA, e
tc.
Maintenance Tools Lis
t
No. Name Q'ty Description Remarks
1 Phillips Screwdriver
(Length 200 mm)
1 For 3~4 mm screws
2 Phillips Screwdriver
(Length 100 mm)
1 For 2~3 mm screws
3 Flat-blade Screwdriver
(Length 100 mm)
1 4.3 mm width
4 Box wrench 1 Box size: 5 mm
5 Tweezers 1
6 Round Nose Pliers 1
7 Cutting Nippers 1
8 Soldering Iron (30W) 1
9 Volt-ohm Meter 1
10 Spring Gauge 1 500g
To Next Page
Loading...
