— 12 —
ESC % n
[Function] Specifying/Canceling Download Character Set
[Code] <1B>H<25>H<n>
[Range] {0 =< n =< FF(Hex)}
[Outline] Specifying/canceling download characters.
Further, only the lowest bit (n0) is valid for n.
[Caution] This setting cannot be restored to initial value even with Initialize command or by
turning power OFF. It can be restored to the initial value by ESC _, a command for
returning to initial state.
[Default] n = 0
[See Also] ESC &
n (Hex) Function
0 Selecting download character set
1 Canceling download character set
To Next Page
Loading...
Need help?
General
