— 45 —
GS :
[Function] Starting/Ending Macro Definition
[Code] <1D>H<3A>H
[Outline] Specifying starting/ending macro definition.
Means termination when received while defining a macro.
[Caution] • Maximum content available for macro definition is 3328 bytes.
•A portion exceeding 3328 bytes is not defined.
• Even with ESC @ (initialization of the printer) having been executed, defined content
is not cleared. Therefore, it is possible to include ESC @ into the content of macro
definition.
• Normal printing operation is carried out even while in macro definition.
[Default] Initially, Macro is not specified.
[See Also] GS ^
[Sample Program]
PRINT #1, CHR$ (&H1D) + “: “ ;
PRINT #1, “+–––+” + CHR$ (&HA);
PRINT #1, “ | | “ + CHR$ (&HA);
PRINT #1, “+–––+” + CHR$ (&HA);
PRINT #1, CHR$ (&H1D) + “: “;
PRINT #1, CHR$ (&H1D) + “ ^ “;
PRINT #1, CHR$ (2) + CHR$ (10);
PRINT #1, CHR$ (0);
[Print Results]
>
>
>
>
Normal Printing during Macro Definition
Printing during Macro Execution
To Next Page
Loading...
Need help?
General
