— 7 —
CR
[Function] Print one line Command
[Code ] <0D>H
[Outline] This command is ignored or its action is the same as LF depending on the last
execution of GS ) 2 command (FLAG SETTING COMMAND).
If Flag 2 is 0, carriage return (CR) command is ignored.
If Flag 2 is 1, CR comamnd will act as LF command.
[Default] CR command is ignored. If you want that it acts like LF command set flag 2 to 1 by
GS ) command.
[See Also] GS )
ESC RS
[Function] Sounds the Buzzer
[Code] <1B>H<1E>H
[Outline] By executing this command the buzzer will beep.
This command functions in the same manner as BEL.
To Next Page
Loading...
Need help?
General
