— 2 —
Code Command Function Page
44 GS H Selecting of Printing Position of HRI Code 46
45 GS L Setting the left margin 47
46 GS W Setting the print area width 48
47 GS ^ Executing the Macro 50
48 GS a Enabling/Disabling
ASB (Automatic Status Back) 51
49 GS f Selecting the font of HRI characters 54
50 GS h Selecting the height of the Bar Code 55
51 GS k Printing the bar code 56
52 GS w Selecting the horizontal size (Scale factor) of the Bar Code 61
53 GS z Saving AT command sequences to send to Bluetooth module 62
54 ESC l Specify/canceling black mark function 64
55 FF Printing and paper feeding to the black mark position 64
* indicates a unique command or a non-compatible command.
*
*
To Next Page
Loading...
Need help?
General
