— 42 —
Memory Switch OFF (0) ON (1)
1 Slach 0 Normal 0
2 CR is ignored CR has the same action as LF
3 Default font A Default font B
4 Prints “Low Battery”. Does not print “Low Battery”.
5 ASB Invalid for default ASB Valid for default
6 Not in use
7 IrDA protocol enabled IrDA protocol disabled
8 Shift JIS for default JIS for default
GS ) n m
[Function] Setting of printer flags
[Code] <1D>H<29>H<n><m>
[Range] {0 =< n =< 8(Hex)}
{m = 0 or 1(Hex)}
[Outline] This model has 8 memory switches and selecting, releasing, and changing a function
is available with this command.
Memory switch setting is retained even after printer power off.
n specifies the number of memory switch to be operated.
m specifies a selection.
The contents of individual memory switches are as shown below.
[Caution] The setting of the changed memory switch is enabled by resetting the power switch.
No. 8 is only for Japanese model.
To Next Page
Loading...
Need help?
General
