— 71 —
5. PROGRAMMING CONSIDERATIONS
5.1 Notes at Lowered Battery Voltage
When battery is low, highly loaded printing such as printing of graphics with much black area may cause
power off during printing.
When executing high loaded printing, charging the battery before lowing of battery voltage is recommended
while keeping checking the information on the battery by the use of relevant command.
5.2 Notes on Printing After Paper Cutting
When the paper is cut by manual cutter, paper is likely to be caught by the cutter.
Therefore, in printing the first line just after cutting, the printing may be compressed in vertical direction.
When starting printing, feed one line without printing to prevent compressed printing.
To Next Page
Loading...
Need help?
General
