— 49 —
(3) When sufficient area cannot be secured even by executing the processing (2),
the right space is decreased.
• When bit image (or downloaded bit image) is developed, if the print area width is
less than the minimum lateral width of the bit image (2 dots for single density, 1
dot for double density), the following processing is carried out only in the same
line.
(1) Extend the print area to the left (decreases left margin) till it reaches the width
equivalent to the minimum lateral width of bit image within the range of
printable area.
[Default] nL = 40 (Hex), nH = 2 (Hex)
[See Also] GS L
To Next Page
Loading...
