— 63 —
[Example] To enable the pairing information to be preserved, following command sequences
need to be sent to the printer.
GS z AT*PAIRINFO=1 CR ^C
<1D 7A 41 54 2A 50 41 49 52 49 4E 46 4F 3D 31 0D 03>h
Printer power is turned off by receiving this command.
Print result at power on after receiving this command as follows.
********************************
BLUETOOTH INIT COMMANDS:
AT*PAIRINFO=1
OK
********************************
To Next Page
Loading...
Need help?
General
