Citizen PMU2300III Series

PMU2300III Series Service Manual
- 31 -
3-1-2. Error Details and LED Indications
Error contents
POWER LED
(green)
ERROR LED (red)
(1) Head overheat error Lit
1) Automatically recoverable
errors
(2) Platen open error
(MSW3-8 is set to OFF
(automatically recoverable))
Lit
(1) Platen open error
(MSW3-8 is set to ON
(recoverable))
Lit
(2) Cutter lock error Lit
2) Recoverable errors
(3) Presenter error Lit
(1) Memory check error Lit
(2) Low voltage error Lit
3) Unrecoverable errors
(3) High voltage error Lit
(1) Paper near end Lit Lit
(2) Paper end Lit Lit
(3) Platen open Lit Lit
4) Other status
(4) Macro execution wait Lit
5) Error related to the black
mark specification
(1) Black mark paper detection error Lit
1) Automatically recoverable errors
(1) Head overheat error
• Error description When the head temperature is high (approx. 75°C or above),
printing operation is stopped and the ERROR LED blinks to
protect the print head from overheat. When the head
temperature is lowered (approx. 70°C or lower), printing
operation will be restarted automatically.
• POWER LED: Lit
• ERROR LED: Blinks (long flash pattern)
• Recovery condition: Automatically recovered when the temperature is lowered.