PMU2300III Series Service Manual
- 65 -
6-4. Updating the Firmware
* The following example is given assuming that the Windows printer driver has been installed on the
computer and that printing operation has been checked.
1) Store the firmware file “ZF3X_DCxx-xxxxxx_PROG.ARC” in a desired folder.
2) Select the [Tool] tab on the Properties screen of the Windows printer driver.
3) Click the [Browse] button and select the location of the firmware file stored in step 1).
4) Check that the power is supplied to the printer, and set paper. The print standby status is
established.
Check that the computer and the printer are correctly connected with cables.
To Next Page
Loading...
