103
3
Ease of use and comfort
Jumpy_en_Chap03_ergonomie-et-confort_ed01-2016
With the engine running, the front seats can be
heated separately.
Heated seats control
If fitted to your vehicle.
F
To raise the head restraint, pull it upwards.
F
To remove the head restraint, press the
lug
A and pull the head restraint upwards.
F
To put the head restraint back in place,
engage the head restraint rods in the
apertures keeping them in line with the
seat backrest.
F To lower the head restraint, press the lug A
and the head restraint at the same time.
The head restraint rods have notches
which prevent the head restraint
lowering; this is a safety device in case
of impact.
The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.
Never drive with the head restraints
removed; they must be in place and
adjusted correctly.
Head restraint height
adjustment
Additional adjustments
Armrest
The armrest has notched positions.
F Raise the armrest fully up.
F Lower it fully down.
F Raise the armrest to the desired position.
F
Use the adjustment wheel to switch on and
select the level of heating required:
0: Off.
1: Low.
2: Medium.
3: High.
To Next Page
Loading...
