CITROEN Jumpy 2020 - Fixed One-Piece Bench Seat

110
Ease of use and comfort
Jumpy_en_Chap03_ergonomie-et-confort_ed01-2016
Fixed one-piece bench seat
F To raise a head restraint, pull it up until it
engages in its notches.
F To remove the head restraint, press the
lug
A and pull the head restraint upward.
F
To put it back in place, engage the head
restraint rods in the apertures keeping
them in line with the seat backrest.
F
To lower it, press on the lug A and on the
head restraint at the same time.
F
Place the head restraints in the low position.
The different items of equipment and
adjustments described hereafter vary
according to the version and the configuration
of your vehicle.
The bench seat includes a one-piece backrest
which may be fixed or folding (table position).
Angled head restraints Folding the seat backrest to
the table position
For more information on the Seat belts,
refer to the corresponding section.
F From the front, raise the handle to release
the seat backrest.
F From the rear, lower the handle to release
the seat backrest.
F Fold the backrest onto the seat cushion.
F To return the backrest to its normal
position, raise the handle and pull the
backrest up.