199
6
Driving
Jumpy_en_Chap06_conduite_ed01-2016
Starting-switching off the engine, manual key, remote control
Ignition switch
1. Stop position.
2.
Ignition on position.
3.
Starting position.
Starting using the key
The parking brake must be applied.
F
Insert the key in the ignition switch.
The system recognises the starting code.
F
Unlock the steering column by
simultaneously turning the steering wheel
and the key.
F
If your vehicle has a manual gearbox, place
the gear lever in neutral then fully depress
the clutch pedal.
In certain circumstances, you may
have to turn the steering wheel firmly to
move the road wheels (if the wheels are
against a kerb, for example).
F
If your vehicle has an electronic gearbox,
place the selector at position N then press
the brake pedal firmly.
F If your vehicle has an automatic gearbox,
place the selector at position P then press
the brake pedal firmly.
To Next Page
Loading...
