EasyManua.ls Logo

CITROEN Jumpy 2020 - Identification Markings

CITROEN Jumpy 2020
595 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
337
9
Technical data
Jumpy_en_Chap09_caracteristiques-techniques_ed01-2016
Identication markings
Various visible markings for the identification of your vehicle.
A. Vehicle Identification Number (VIN)
under the bonnet.
This number is engraved on the chassis
near the right hand front wheel arch.
The tyre pressures must be checked
when the tyres are cold, at least once
a month.
If the tyre pressures are too low, this
increases fuel consumption.
B.
Vehicle Identification Number (VIN) on
the windscreen lower cross member.
This number is indicated on a self-
adhesive label which is visible through the
windscreen.
C.
Manufacturer's label.
This self-destroying label on the middle
door pillar, right or left hand side, contains
the following information:
-
the manufacturer's name,
-
the European whole vehicle type
approval number,
-
the vehicle identification number (VIN),
- the maximum authorised weight (gross
vehicle weight),
- the maximum authorised weight with
trailer (gross train weight),
- the maximum front axle weight,
- the maximum rear axle weight.
D.
Tyre/paint label.
This label on the middle door pillar, driver's
side, contains the following information:
- the tyre inflation pressures, laden and
unladen,
- the tyre sizes (including the tyre load
index and speed rating),
- the inflation pressure for the spare
wheel,
- the paint colour code.

Table of Contents

Related product manuals