236
Driving
Jumpy_en_Chap06_conduite_ed01-2016
Dynamic cruise control ("CRUISE")
This systems allows the vehicle's speed to
be maintained at a value set by the driver.
In addition it allows (when circumstances
permit) an inter-vehicle distance that you
have selected to be maintained between
your vehicle and the vehicle in front.
In the Driving menu, activate/deactivate
"Dynamic cruise control".
The state of the system is memorised on
switching off the ignition.
Activation / Deactivation
The cruise control selection
thumbwheel must be at the
"CRUISE" position, otherwise the
selection is not taken into account.
Activation or deactivation of
the system is via the vehicle
configuration menu.
With the touch screen
1. Select cruise control mode.
2.
Programme a speed setting/Reduce the
speed setting.
3. Programme a speed setting/Increase the
speed setting.
4. Pause / Resume cruise control.
5.
If fitted to your vehicle, display the list of
memorised speeds or memorise the speed
suggested by the speed limit recognition
system.
6. Select the inter-vehicle distance ("Close",
"Normal", "Distant").
Steering mounted controls
By default, the inter-vehicle distance is
set at "Normal".
Otherwise, the last setting made will be
used when switching on the system.
To Next Page
Loading...
