274
Practical information
Jumpy_en_Chap07_info-pratiques_ed01-2016
Changing a wiper blade
Before removing a front
wiper blade
Removing
F Raise the corresponding wiper arm.
F
Unclip the wiper blade and remove it.
Fitting
F Put the corresponding new wiper blade in
place and clip it.
F Fold down the wiper arm carefully.
After fitting a front wiper
blade
F Switch on the ignition.
F
Operate the wiper stalk again to park the
wiper blades.
F Within one minute after switching off
the ignition, operate the wiper stalk to
position the wiper blades vertically on the
windscreen.
To Next Page
Loading...
