104
Ease of use and comfort
Jumpy_en_Chap03_ergonomie-et-confort_ed01-2016
Head restraint height
adjustment
F To raise the head restraint, pull it upwards.
F
To remove the head restraint, press the
lug
A and pull the head restraint upwards.
F
To put the head restraint back in place,
engage the head restraint stems in the
openings keeping them in line with the seat
back.
F
To lower the head restraint, press the lug A
and the head restraint at the same time.
The head restraint rods have notches
which prevent the head restraint
lowering; this is a safety device in case
of impact.
The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.
Never drive with the head restraints
removed; they must be in place and
adjusted correctly.
2-seat front bench seat
If fitted to your vehicle, this is fixed and has a seat belt on the backrest for the seat alongside the
driver.
For more information on the Seat belts,
refer to the corresponding section.
To Next Page
Loading...
