113
3
Ease of use and comfort
Jumpy_en_Chap03_ergonomie-et-confort_ed01-2016
Fixed rear seat and bench seat
The seat has a backrest that may be fixed or
folding (table position).
The bench seat has a one-piece backrest that
may be fixed or foldable (table position).
F To raise a head restraint, pull it up until it
engages in its notches.
F To remove the head restraint, press the
lug
A and pull the head restraint upward.
F
To put it back in place, engage the head
restraint rods in the apertures keeping
them in line with the seat backrest.
F
To lower it, press on the lug A and on the
head restraint at the same time.
Angled head restraints
F Put the head restraints into the low position.
Folding the backrest to the
table position
For more information on the Seat belts,
refer to the corresponding section.
F From the front, raise the handle to release
the backrest.
F From the rear, lower the lever to release
the backrest.
The different levels of equipment and adjustments described hereafter vary according to the version and the configuration of your vehicle.
To Next Page
Loading...
