153
4
Lighting and visibility
Jumpy_en_Chap04_eclairage-et-visibilite_ed01-2016
Automatic headlamp dipping
System which automatically changes between
dipped and main beam according to the
ambient light level and the driving conditions,
using a camera located at the top of the
windscreen.
Activation / deactivation
F Put the lighting control stalk ring in the
"AUTO" or dipped/main beam position.
This automatic headlamp dipping
system is a driving aid.
The driver remains responsible for the
vehicle's lighting and for adapting its
settings to the levels of brightness and
visibility and the traffic conditions.
The system will be operational as soon
as you have exceeded 15 mph (25 km/h).
If the speed drops below 9 mph
(15
km/h), the system no longer
operates.
The driver can intervene at any time
if the circumstances dictate by pulling
on the lighting control stalk to switch
between main and dipped beam.
Flashing the headlamps does not
deactivate the system.
The state of the system stays
in memory when the ignition is
switched
off.
Pause
The driver can intervene at any time if the
situation requires a change in the state of the
headlamps.
F
Flashing the headlamps
pauses the function
and the lighting system
changes to "automatic
illumination of headlamps".
To Next Page
Loading...
